Difficulty

Moderate

Steps

13

Time Required

                          10 minutes

Sections

2

  • Battery
  • 4 steps
  • Screen
  • 9 steps

Flags

0

  • BackLenovo IdeaPad Z570

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Place the laptop face down with the battery facing away from you

Place the laptop face down with the battery facing away from you

1024

Step 2

  • Flip the right switch right-bound

Flip the right switch right-bound

Step 3

  • Hold the left switch.

Hold the left switch.

Step 4

  • Push the battery forward lightly to remove it while holding the left switch.

Push the battery forward lightly to remove it while holding the left switch.

Step 5

              Screen
  • Open up the laptop with the screen facing you.

Open up the laptop with the screen facing you.

Step 6

  • Remove the two rubber square screw covers located in the left and right lower hand corners of the screen.

Remove the two rubber square screw covers located in the left and right lower hand corners of the screen.

Step 7

  • Unscrew the two 4 mm screws behind the two rubber screw covers using the Phillips #0 screwdriver.

Unscrew the two 4 mm screws behind the two rubber screw covers using the Phillips #0 screwdriver.

Step 8

  • Using the opening tool, pry open the plastic screen border, beginning with the upper right hand corner then working your way around.
  • Pry off the screen cover from the device.

Using the opening tool, pry open the plastic screen border, beginning with the upper right hand corner then working your way around.

Pry off the screen cover from the device.

Step 9

  • Remove the two 2 mm screws at the top two corners of the screen using the Phillips #0 screwdriver.

Remove the two 2 mm screws at the top two corners of the screen using the Phillips #0 screwdriver.

Step 10

  • Loosen the four 2 mm screws located at the bottom corners of the screen.
  • These screws cannot be removed.

Loosen the four 2 mm screws located at the bottom corners of the screen.

These screws cannot be removed.

Step 11

  • Tilt the screen forward gently.
  • Remove four 3 mm screws on the sides of the brackets holding the screen (two on the left side and two on the right side) using the Phillips #0 screwdriver.

Tilt the screen forward gently.

Remove four 3 mm screws on the sides of the brackets holding the screen (two on the left side and two on the right side) using the Phillips #0 screwdriver.

Step 12

  • Lean the LCD screen face-down on the keyboard gently.

Lean the LCD screen face-down on the keyboard gently.

Step 13

  • Gently remove the adhesive covering surrounding the wires that’s connected to the back of the screen.
  • Disconnect the plug from the connection terminal.
  • Remove the screen completely.

Gently remove the adhesive covering surrounding the wires that’s connected to the back of the screen.

Disconnect the plug from the connection terminal.

Remove the screen completely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Daniel Lopes

Member since: 03/08/2019

565 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S1-G6, Botvin Spring 2019                        

                                                  Member of UMass Dartmouth, Team S1-G6, Botvin Spring 2019 



                    UMASSD-BOTVIN-S19S1G6                     


                                            4 Members                     


                                            5 Guides authored