Difficulty
Moderate
Steps
3
Time Required
3 - 6 minutes
Sections
1
- RAM
- 3 steps
Flags
0
BackLenovo IdeaPad Y700-15ACZ
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
RAM is an important part of the laptop because it allows for easy access to information, do not enough RAM limits the laptop which can prevent it from turning on.
What you need
Step 1
RAM
- Flip the laptop upside down so that the bottom is facing up.
- Use a Phillips #0 screwdriver to remove the eleven screws (two 1.5 mm screws, one 0.3 mm screw, and eight 0.5 mm screws) that secure the bottom cover.
Flip the laptop upside down so that the bottom is facing up.
Use a Phillips #0 screwdriver to remove the eleven screws (two 1.5 mm screws, one 0.3 mm screw, and eight 0.5 mm screws) that secure the bottom cover.
1024
Step 2
- Use a Jimmy or plastic opening tool to pop up the cover and remove it from the laptop.
Use a Jimmy or plastic opening tool to pop up the cover and remove it from the laptop.
Step 3
- Place fingers on the latch that pops out the RAM sticks in the sides.
- Push down on the latches to pop out the RAM sticks, they can now be pulled out and be replaced.
Place fingers on the latch that pops out the RAM sticks in the sides.
Push down on the latches to pop out the RAM sticks, they can now be pulled out and be replaced.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kevin
Member since: 09/28/2022
351 Reputation
3 Guides authored
Badges:
3
Team
CSU Los Angeles, Team 6-6, Adachi Fall 2022
Member of CSU Los Angeles, Team 6-6, Adachi Fall 2022
CSULA-ADACHI-F22S6G6
4 Members
3 Guides authored
