Difficulty

Moderate

Steps

9

Time Required

                          10 minutes

Sections

3

  • Battery
  • 2 steps
  • Keyboard
  • 3 steps
  • Motherboard
  • 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo IdeaPad Y580-2099

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Slide out both locks for the battery, located on the back of the device.

Slide out both locks for the battery, located on the back of the device.

1024

Step 2

  • Remove the battery.

Remove the battery.

Step 3

              Keyboard
  • Unscrew the 2 screws on the bottom of the device.
  • Slide the back panel out.

Unscrew the 2 screws on the bottom of the device.

Slide the back panel out.

Step 4

  • Unscrew the 3 “keyboard” detected screws.

Unscrew the 3 “keyboard” detected screws.

Step 5

  • Flip the laptop over and open up.
  • Then pry up the whole keyboard using the spudger.
  • Make sure to use a plastic spudger. You could damage the device using anything else.
  • Make sure not to take the frame that goes around the keys off. This part is not removable.

Flip the laptop over and open up.

Then pry up the whole keyboard using the spudger.

Make sure to use a plastic spudger. You could damage the device using anything else.

Make sure not to take the frame that goes around the keys off. This part is not removable.

Step 6

              Motherboard
  • Flip laptop back over and unscrew the disc drive screw.
  • Remove the disc drive.
  • Unscrew all of the screws on the back of the device.

Flip laptop back over and unscrew the disc drive screw.

Remove the disc drive.

Unscrew all of the screws on the back of the device.

Step 7

  • Flip the device over.
  • Unplug the two wires, as shown in the images.
  • Lift up on the keyboard bezel.
  • The bezel should come up easy, if not go back and make sure all screws have been removed.

Flip the device over.

Unplug the two wires, as shown in the images.

Lift up on the keyboard bezel.

The bezel should come up easy, if not go back and make sure all screws have been removed.

Step 8

  • Unscrew the screws on the motherboard.
  • Disconnect the three connectors the two black and one white.

Unscrew the screws on the motherboard.

Disconnect the three connectors the two black and one white.

Step 9

  • Carefully lift up the motherboard.
  • Unplug the wires underneath the motherboard.
  • Be careful not to rip the wires underneath the motherboard while lifting it up.

Carefully lift up the motherboard.

Unplug the wires underneath the motherboard.

Be careful not to rip the wires underneath the motherboard while lifting it up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Lauren

Member since: 09/25/2017

481 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       University of North Texas, Team S1-G5, Thompson Fall 2017                        

                                                  Member of University of North Texas, Team S1-G5, Thompson Fall 2017 



                    UNT-THOMPSON-F17S1G5                     


                                            4 Members                     


                                            5 Guides authored