Difficulty

Moderate

Steps

12

Time Required

                          5 - 10 minutes

Sections

4

  • Battery
  • 2 steps
  • Keyboard
  • 3 steps
  • Motherboard
  • 4 steps
  • Fan
  • 3 steps

Flags

0

  • BackLenovo IdeaPad Y580-2099

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Slide out both locks for the battery, located on the back of the device.

Slide out both locks for the battery, located on the back of the device.

1024

Step 2

  • Remove the battery.

Remove the battery.

Step 3

              Keyboard
  • Unscrew the 2 screws on the bottom of the device.
  • Slide the back panel out.

Unscrew the 2 screws on the bottom of the device.

Slide the back panel out.

Step 4

  • Unscrew the 3 “keyboard” detected screws.

Unscrew the 3 “keyboard” detected screws.

Step 5

  • Flip the laptop over and open up.
  • Then pry up the whole keyboard using the spudger.
  • Make sure to use a plastic spudger. You could damage the device using anything else.
  • Make sure not to take the frame that goes around the keys off. This part is not removable.

Flip the laptop over and open up.

Then pry up the whole keyboard using the spudger.

Make sure to use a plastic spudger. You could damage the device using anything else.

Make sure not to take the frame that goes around the keys off. This part is not removable.

Step 6

              Motherboard
  • Flip laptop back over and unscrew the disc drive screw.
  • Remove the disc drive.
  • Unscrew all of the screws on the back of the device.

Flip laptop back over and unscrew the disc drive screw.

Remove the disc drive.

Unscrew all of the screws on the back of the device.

Step 7

  • Flip the device over.
  • Unplug the two wires, as shown in the images.
  • Lift up on the keyboard bezel.
  • The bezel should come up easy, if not go back and make sure all screws have been removed.

Flip the device over.

Unplug the two wires, as shown in the images.

Lift up on the keyboard bezel.

The bezel should come up easy, if not go back and make sure all screws have been removed.

Step 8

  • Unscrew the screws on the motherboard.
  • Disconnect the three connectors the two black and one white.

Unscrew the screws on the motherboard.

Disconnect the three connectors the two black and one white.

Step 9

  • Carefully lift up the motherboard.
  • Unplug the wires underneath the motherboard.
  • Be careful not to rip the wires underneath the motherboard while lifting it up.

Carefully lift up the motherboard.

Unplug the wires underneath the motherboard.

Be careful not to rip the wires underneath the motherboard while lifting it up.

Step 10

              Fan
  • Use a Phillips #0 screwdriver to remove the four 6.5 mm screws.

Use a Phillips #0 screwdriver to remove the four 6.5 mm screws.

Step 11

  • Unplug the connector circled in red.
  • To minimize the risk of damaging the wires, pull on the connector directly and do not try to disconnect by pulling on the wires.

Unplug the connector circled in red.

To minimize the risk of damaging the wires, pull on the connector directly and do not try to disconnect by pulling on the wires.

Step 12

  • Lift the fan assembly clear of the motherboard.

Lift the fan assembly clear of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Jeryn Fast

Member since: 04/12/2022

421 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team 1-1, Beck Spring 2022                        

                                                  Member of IUPUI, Team 1-1, Beck Spring 2022 



                    IUPUI-BECK-S22S1G1                     


                                            3 Members                     


                                            3 Guides authored