Lenovo Ideapad Y410P Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 7 minutes

Sections

Battery
3 steps
Screen
3 steps

Flags

BackLenovo IdeaPad Y410p
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Turn off your laptop before starting.
Flip the laptop over so the model stickers are facing up.

Turn off your laptop before starting.

Flip the laptop over so the model stickers are facing up.

1024

Step 2

Slide the left battery lock to the unlock position and release.
Slide the right battery lock to the unlock positon and hold it in place.

Slide the left battery lock to the unlock position and release.

Slide the right battery lock to the unlock positon and hold it in place.

Step 3

While holding the right battery lock in the unlock position, slide the battery carefully out of the laptop and set it aside.

While holding the right battery lock in the unlock position, slide the battery carefully out of the laptop and set it aside.

Step 4

              Screen

Using the metal spudger, pry the screen cover off from all sides.
Carefully lift the screen cover up and outwards.
Place the screen cover aside.

Using the metal spudger, pry the screen cover off from all sides.

Carefully lift the screen cover up and outwards.

Place the screen cover aside.

Step 5

Using the Phillips #0 screwdriver, remove the four 8mm screws from each corner of the screen.
Carefully lift the screen up and place it face down on the keyboard.
A thick cord connects the bottom of the screen to the computer. Do not tug or remove this cord from the computer.

Using the Phillips #0 screwdriver, remove the four 8mm screws from each corner of the screen.

Carefully lift the screen up and place it face down on the keyboard.

A thick cord connects the bottom of the screen to the computer. Do not tug or remove this cord from the computer.

Step 6

Remove the adhesive tape from the small rectangular connector at the bottom of the screen.
Carefully pull the wire connector from the screen connector.
Remove the screen.

Remove the adhesive tape from the small rectangular connector at the bottom of the screen.

Carefully pull the wire connector from the screen connector.

Remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Nick Torres

Member since: 09/18/2018

571 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of North Texas, Team S3-G6, Raign Fall 2018                        

                                                  Member of University of North Texas, Team S3-G6, Raign Fall 2018 



                    UNT-RAIGN-F18S3G6                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team