Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Network Adapter
- 4 steps
Flags
0
BackLenovo IdeaPad U530 Touch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Network Adapter
- Remove all of the screws on the back panel with a Phillips #000 screwdriver.
- Turn over the device and remove the two screws on the outside of the hinges.
Remove all of the screws on the back panel with a Phillips #000 screwdriver.
Turn over the device and remove the two screws on the outside of the hinges.
1024
Step 2
- Use a pry tool or iFixIt Opening tool to separate the back panel from the device.
- Lift the back panel straight up to remove.
Use a pry tool or iFixIt Opening tool to separate the back panel from the device.
Lift the back panel straight up to remove.
Step 3
- Remove the black and white wires that attach the fan to the network adapter.
Remove the black and white wires that attach the fan to the network adapter.
Step 4
- Remove the two screws attaching the network adapter to the motherboard.
- Remove the network adapter by sliding it down out of its connector.
Remove the two screws attaching the network adapter to the motherboard.
Remove the network adapter by sliding it down out of its connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Rebekah Harmon
Member since: 01/23/2018
108 Reputation
2 Guides authored
Badges:
3
Team
Western Carolina University, Team S1-G2, Virtue Spring 2018
Member of Western Carolina University, Team S1-G2, Virtue Spring 2018
WCU-VIRTUE-S18S1G2
4 Members
3 Guides authored
