Difficulty

Moderate

Steps

10

Time Required

                          7 minutes

Sections

2

  • Battery
  • 4 steps
  • Screen
  • 6 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackLenovo IdeaPad U450

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off and unplug your laptop to prevent the risk of electrocution.
  • Turn your laptop over so that the bottom is face up.

Turn off and unplug your laptop to prevent the risk of electrocution.

Turn your laptop over so that the bottom is face up.

1024

Step 2

  • On the top left of the laptop there is a switch. Make sure it’s pushed in the unlocked position.

On the top left of the laptop there is a switch. Make sure it’s pushed in the unlocked position.

Step 3

  • Locate the switch collinear with the last one and move the switch to an unlocked position.

Locate the switch collinear with the last one and move the switch to an unlocked position.

Step 4

  • Remove the unlocked battery.

Remove the unlocked battery.

Step 5

              Screen
  • Open the laptop.

Open the laptop.

Step 6

  • Remove the four 7mm phillips head screws in the corners of the screen with a Phillips #00 Screwdriver.

Remove the four 7mm phillips head screws in the corners of the screen with a Phillips #00 Screwdriver.

Step 7

  • Pry the screen out of the tabs with a spudger.

Pry the screen out of the tabs with a spudger.

Step 8

  • Remove the four 7mm phillips head screws located beneath the screen.

Remove the four 7mm phillips head screws located beneath the screen.

Step 9

  • Pop out the connector that links the screen to the motherboard.

Pop out the connector that links the screen to the motherboard.

Step 10

  • Pop the new screen into the connector.

Pop the new screen into the connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Rachel L Rodrigues

Member since: 03/21/2017

446 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S7-G1, Julie Spring 2017                        

                                                  Member of UMass Dartmouth, Team S7-G1, Julie Spring 2017 



                    UMASSD-JULIE-S17S7G1                     


                                            5 Members                     


                                            5 Guides authored