Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
2
- Bottom Cover
- 3 steps
- Wifi Card
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo IdeaPad U430 Touch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Power off your computer before you begin.
- Find and remove the 10 Phillips style body screws on the bottom of the laptop case.
Power off your computer before you begin.
Find and remove the 10 Phillips style body screws on the bottom of the laptop case.
1024
Step 2
- Remove 2 screws, 1 located on the left hinge cover and one located on the right hinge cover.
Remove 2 screws, 1 located on the left hinge cover and one located on the right hinge cover.
Step 3
- Starting from the front, use a plastic opening tool to separate the bottom of the case from the body of the laptop.
Starting from the front, use a plastic opening tool to separate the bottom of the case from the body of the laptop.
Step 4
Wifi Card
- Remove the two 2.8mm screws using the Phillips #0 screwdriver.
Remove the two 2.8mm screws using the Phillips #0 screwdriver.
Step 5
- Remove the two snap cables connecting the wifi card to the rest of the computer.
Remove the two snap cables connecting the wifi card to the rest of the computer.
Step 6
- Slide the Wifi card away from the Wifi card connector.
Slide the Wifi card away from the Wifi card connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Blake Hill
Member since: 02/20/2020
97 Reputation
1 Guide authored
Badges:
3
Team
The Citadel Military College of South Carolina, Team S1-G1, Eggleston Spring 2020
Member of The Citadel Military College of South Carolina, Team S1-G1, Eggleston Spring 2020
CMCSC-EGGLESTON-S20S1G1
3 Members
6 Guides authored
