Lenovo Ideapad U430 Touch Battery Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 minutes            

Sections

2

• Bottom Cover
• 3 steps
• Battery
• 3 steps

Flags

0

• BackLenovo IdeaPad U430 Touch

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover               

• Power off your computer before you begin.
• Find and remove the 10 Phillips style body screws on the bottom of the laptop case.

Power off your computer before you begin.

Find and remove the 10 Phillips style body screws on the bottom of the laptop case.

1024

Step 2

• Remove 2 screws, 1 located on the left hinge cover and one located on the right hinge cover.

Remove 2 screws, 1 located on the left hinge cover and one located on the right hinge cover.

Step 3

• Starting from the front, use a plastic opening tool to separate the bottom of the case from the body of the laptop.

Starting from the front, use a plastic opening tool to separate the bottom of the case from the body of the laptop.

Step 4

              Battery               

• Remove the five 2.8 mm #1 Phillips head screws that hold down the battery pack.

Remove the five 2.8 mm #1 Phillips head screws that hold down the battery pack.

Step 5

• Using a combination of plastic opening tool and spudger, press in on the clips on the sides of the battery connector and push the connector out
• When you get the connector out far enough, grab behind the connector tabs with tweezers and wiggle the connector the rest of the way out.
• The battery connector is very tight fitting, you may need to use a metal spudger in order to get the connector out far enough.

Using a combination of plastic opening tool and spudger, press in on the clips on the sides of the battery connector and push the connector out

When you get the connector out far enough, grab behind the connector tabs with tweezers and wiggle the connector the rest of the way out.

The battery connector is very tight fitting, you may need to use a metal spudger in order to get the connector out far enough.

Step 6

• Once the battery is disconnected, lift up on the front of the battery and remove it from the laptop body.

Once the battery is disconnected, lift up on the front of the battery and remove it from the laptop body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Zach Cossey                     

Member since: 09/20/2016

360 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team S2-G6, Nance Spring 2017                        

                                                  Member of USF Tampa, Team S2-G6, Nance Spring 2017 



                    USFT-NANCE-S17S2G6                     


                                            3 Members                     


                                            15 Guides authored