Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
2
- Bottom Cover
- 2 steps
- RAM
- 1 step
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo IdeaPad U410
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Bottom Cover
- Using the metal spudger, remove all the rubber squares on the bottom of the laptop.
Using the metal spudger, remove all the rubber squares on the bottom of the laptop.
1024
Step 2
- Remove the three 6 mm Phillips #1 screws holding the panel on the laptop.
- Pry the panel from the laptop using your hands or the metal spudger if necessary.
Remove the three 6 mm Phillips #1 screws holding the panel on the laptop.
Pry the panel from the laptop using your hands or the metal spudger if necessary.
Step 3
RAM
- Using your hands, gently press on the two clips parallel to the sides of the RAM.
- Remove RAM from the laptop.
Using your hands, gently press on the two clips parallel to the sides of the RAM.
Remove RAM from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Destiny
Member since: 09/18/2018
109 Reputation
1 Guide authored
Badges:
3
Team
University of North Texas, Team S3-G5, Raign Fall 2018
Member of University of North Texas, Team S3-G5, Raign Fall 2018
UNT-RAIGN-F18S3G5
4 Members
6 Guides authored
