Difficulty
Moderate
Steps
7
Time Required
10 - 15 minutes
Sections
2
- Bottom Cover
- 2 steps
- Hard Drive
- 5 steps
Flags
0
BackLenovo IdeaPad U410
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Using the metal spudger, remove all the rubber squares on the bottom of the laptop.
Using the metal spudger, remove all the rubber squares on the bottom of the laptop.
1024
Step 2
- Remove the three 6 mm Phillips #1 screws holding the panel on the laptop.
- Pry the panel from the laptop using your hands or the metal spudger if necessary.
Remove the three 6 mm Phillips #1 screws holding the panel on the laptop.
Pry the panel from the laptop using your hands or the metal spudger if necessary.
Step 3
Hard Drive
- Locate the hard drive in the bottom left corner.
Locate the hard drive in the bottom left corner.
Step 4
- Use the Phillips #1 screwdriver to remove the three 3mm screws located on the rim of the hard drive.
Use the Phillips #1 screwdriver to remove the three 3mm screws located on the rim of the hard drive.
Step 5
- Use your fingers to detach the black connector from the hard drive.
Use your fingers to detach the black connector from the hard drive.
Step 6
- Unscrew the four screws on either side of the hard drive with the Phillips #1 screwdriver.
Unscrew the four screws on either side of the hard drive with the Phillips #1 screwdriver.
Step 7
- Use your fingers and gently lift the hard drive from the case it was screwed into.
Use your fingers and gently lift the hard drive from the case it was screwed into.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Jeff Nyheim
Member since: 09/18/2018
169 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
University of North Texas, Team S3-G5, Raign Fall 2018
Member of University of North Texas, Team S3-G5, Raign Fall 2018
UNT-RAIGN-F18S3G5
4 Members
6 Guides authored