Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Hard Drive
- 3 steps
Flags
0
BackLenovo IdeaPad U350
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Unscrew the six screws on the back panel of the laptop using a PH1 Phillips bit.
- These screws are attached to the panel. When unscrewing, be sure to stop when you here a click.
Unscrew the six screws on the back panel of the laptop using a PH1 Phillips bit.
These screws are attached to the panel. When unscrewing, be sure to stop when you here a click.
1024
Step 2
- Lift the back panel from the side closest to the battery and remove the panel.
Lift the back panel from the side closest to the battery and remove the panel.
Step 3
- Slide the hard drive to the right, away from the RAM modules.
- Lift the hard drive from the side closest to the RAM modules.
- When re-inserting the hard drive, ensure that the copper contacts on the drive’s connector are facing upwards.
Slide the hard drive to the right, away from the RAM modules.
Lift the hard drive from the side closest to the RAM modules.
When re-inserting the hard drive, ensure that the copper contacts on the drive’s connector are facing upwards.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
James Morizzo
Member since: 09/29/2014
496 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 1-4, Hickman Fall 2014
Member of USF Tampa, Team 1-4, Hickman Fall 2014
USFT-HICKMAN-F14S1G4
3 Members
5 Guides authored
