Difficulty

Moderate

Steps

12

Time Required

                          10 minutes

Sections

2

  • Battery
  • 5 steps
  • Hard Drive
  • 7 steps

Flags

0

  • BackLenovo Ideapad S415 Touch

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip laptop over bottom side up.
  • Locate the two battery release switches.

Flip laptop over bottom side up.

Locate the two battery release switches.

1024

Step 2

  • Use your finger to push the battery release switch labeled “1.” The red indicates that the switch is unlocked.

Use your finger to push the battery release switch labeled “1.” The red indicates that the switch is unlocked.

Step 3

  • Use your finger to push the battery switch labeled “2.”

Use your finger to push the battery switch labeled “2.”

Step 4

  • Once both switches are unlocked, the battery will release.

Once both switches are unlocked, the battery will release.

Step 5

  • When replacing the battery make sure the two protruding holes line up with the slot.
  • Carefully remove the battery.

When replacing the battery make sure the two protruding holes line up with the slot.

Carefully remove the battery.

Step 6

              Hard Drive
  • Locate the five black screws on the back.
  • Use a Phillips #0 screwdriver to remove all five black 6 mm screws.

Locate the five black screws on the back.

Use a Phillips #0 screwdriver to remove all five black 6 mm screws.

Step 7

  • Locate the three silver screws underneath the battery.
  • Use the Phillips #0 screwdriver to remove all three 4 mm screws.

Locate the three silver screws underneath the battery.

Use the Phillips #0 screwdriver to remove all three 4 mm screws.

Step 8

  • Locate the four rubber stoppers near each corner of the laptop.
  • Open up the stopper with your hands.
  • Use the Phillips #0 screwdriver to remove the 6 mm screws underneath all four stoppers.

Locate the four rubber stoppers near each corner of the laptop.

Open up the stopper with your hands.

Use the Phillips #0 screwdriver to remove the 6 mm screws underneath all four stoppers.

Step 9

  • Open the laptop carefully.

Open the laptop carefully.

Step 10

  • Locate the hard drive.
  • Use the Phillips #0 screwdriver to remove the two 4 mm screws that are holding the hard drive in place.

Locate the hard drive.

Use the Phillips #0 screwdriver to remove the two 4 mm screws that are holding the hard drive in place.

Step 11

  • The hard drive is now removed from the laptop.

The hard drive is now removed from the laptop.

Step 12

  • Once the hard drive is removed, locate the four screws that hold the metal frame to the hard drive.
  • Use the Phillips #0 screwdriver to remove the 4 mm silver screws on all sides.

Once the hard drive is removed, locate the four screws that hold the metal frame to the hard drive.

Use the Phillips #0 screwdriver to remove the 4 mm silver screws on all sides.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Casey Zhang

Member since: 02/06/2019

315 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UC Davis, Team S20-G5, Lore Winter 2019                        

                                                  Member of UC Davis, Team S20-G5, Lore Winter 2019 



                    UCD-LORE-W19S20G5                     


                                            3 Members                     


                                            4 Guides authored