Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
2
- Back Panel
- 2 steps
- Wi-Fi Card
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackLenovo IdeaPad S340-15IWL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Back Panel
- Power off the laptop and place it face-down on a non-scratching surface.
- Using a Torx T5 screwdriver head, remove all ten 6 mm screws holding the back panel in place.
Power off the laptop and place it face-down on a non-scratching surface.
Using a Torx T5 screwdriver head, remove all ten 6 mm screws holding the back panel in place.
1024
Step 2
- Slide a plastic opening tool underneath the back case near the screen hinges.
- Gently pry up on either side of the case.
- You may hear popping sounds as you pry up the back case. This is normal. If the case does not open, try prying at a different angle/position.
Slide a plastic opening tool underneath the back case near the screen hinges.
Gently pry up on either side of the case.
You may hear popping sounds as you pry up the back case. This is normal. If the case does not open, try prying at a different angle/position.
Step 3
Wi-Fi Card
- Pull up the black foam adhesive that covers the screw and connectors holding the Wi-Fi card in place.
Pull up the black foam adhesive that covers the screw and connectors holding the Wi-Fi card in place.
Step 4
- Using an opening tool, lift up on the black and white coaxial cables on the Wi-Fi card and gently pull upward to unplug them.
- When reconnecting the cables, be sure to match the colors to the arrows on the Wi-Fi card.
Using an opening tool, lift up on the black and white coaxial cables on the Wi-Fi card and gently pull upward to unplug them.
When reconnecting the cables, be sure to match the colors to the arrows on the Wi-Fi card.
Step 5
- Remove the single 3 mm screw holding the Wi-Fi card in place using a Phillips #0 screwdriver.
- Gently lift the Wi-Fi card out of the computer.
Remove the single 3 mm screw holding the Wi-Fi card in place using a Phillips #0 screwdriver.
Gently lift the Wi-Fi card out of the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
Kristen Gismondi
Member since: 11/12/2014
69,397 Reputation
176 Guides authored
Badges:
44
+41 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored