Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

2

  • Back Panel
  • 2 steps
  • CMOS Battery
  • 2 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackLenovo IdeaPad S340-15IWL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Panel               
  • Power off the laptop and place it face-down on a non-scratching surface.
  • Using a Torx T5 screwdriver head, remove all ten 6 mm screws holding the back panel in place.

Power off the laptop and place it face-down on a non-scratching surface.

Using a Torx T5 screwdriver head, remove all ten 6 mm screws holding the back panel in place.

1024

Step 2

  • Slide a plastic opening tool underneath the back case near the screen hinges.
  • Gently pry up on either side of the case.
  • You may hear popping sounds as you pry up the back case. This is normal. If the case does not open, try prying at a different angle/position.

Slide a plastic opening tool underneath the back case near the screen hinges.

Gently pry up on either side of the case.

You may hear popping sounds as you pry up the back case. This is normal. If the case does not open, try prying at a different angle/position.

Step 3

              CMOS Battery               
  • Remove the circular CMOS battery on the far left side of the computer by lifting it with your finger or an opening tool.
  • This is only attached with adhesive, so it does not require extensive force.

Remove the circular CMOS battery on the far left side of the computer by lifting it with your finger or an opening tool.

This is only attached with adhesive, so it does not require extensive force.

Step 4

  • Unplug the bundled red and black wires connecting the CMOS battery to the side of the device.
  • Remove the CMOS battery from the laptop.

Unplug the bundled red and black wires connecting the CMOS battery to the side of the device.

Remove the CMOS battery from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Kristen Gismondi                     

Member since: 11/12/2014

69,397 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored