Lenovo Ideapad S210 Touch Wi Fi Network Card Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 minutes            

Sections

3

• Battery
• 2 steps
• Back Panel
• 3 steps
• Wi-Fi Network Card
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLenovo IdeaPad S210 Touch

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Ensure your device is unplugged and shut down.
• Place the laptop down with the cooling vents facing upwards.

Ensure your device is unplugged and shut down.

Place the laptop down with the cooling vents facing upwards.

1024

Step 2

• Use your finger to slide the latch towards the unlocked position (away from the other latch). If done correctly you will see red.
• Slide the second latch to the unlocked position while gently pulling the battery away from the laptop.

Use your finger to slide the latch towards the unlocked position (away from the other latch). If done correctly you will see red.

Slide the second latch to the unlocked position while gently pulling the battery away from the laptop.

Step 3

              Back Panel               

• Using the #0 Phillips screwdriver, remove the nine 4mm screws on the back panel.

Using the #0 Phillips screwdriver, remove the nine 4mm screws on the back panel.

Step 4

• Gently pull the two rubber feet closest to battery away from the device. Using a #0 Phillips screwdriver, remove the 5mm screw under each rubber foot.

Gently pull the two rubber feet closest to battery away from the device. Using a #0 Phillips screwdriver, remove the 5mm screw under each rubber foot.

Step 5

• Slowly begin working your plastic opening tool along the panel to undo the latches around the laptop.

Slowly begin working your plastic opening tool along the panel to undo the latches around the laptop.

Step 6

              Wi-Fi Network Card               

• Remove both antenna wires by pulling upwards gently.

Remove both antenna wires by pulling upwards gently.

Step 7

• Using the #00 Phillips screwdriver, remove one 3mm screw from the network card.

Using the #00 Phillips screwdriver, remove one 3mm screw from the network card.

Step 8

• Slide Wi-Fi network card away from motherboard and remove gently.

Slide Wi-Fi network card away from motherboard and remove gently.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Zack Colman                     

Member since: 07/08/2019

864 Reputation

                                      8 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S3-G15, Watkins Summer 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S3-G15, Watkins Summer 2019 



                    ERAU-WATKINS-SU19S3G15                     


                                            3 Members                     


                                            8 Guides authored