Lenovo Ideapad S10 2 Wireless Wifi Card Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

• Wireless WiFi Card
• 5 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackLenovo IdeaPad S10-2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Wireless WiFi Card               

• The tools needed are the blunt edge of the spudger and a Phillips J0 head screwdriver.
• Ensure your device is powered off before continuing.

The tools needed are the blunt edge of the spudger and a Phillips J0 head screwdriver.

Ensure your device is powered off before continuing.

1024

Step 2

• Turn the laptop over to begin.
• Remove the two 40 mm screws with a Phillips J0 head screwdriver.

Turn the laptop over to begin.

Remove the two 40 mm screws with a Phillips J0 head screwdriver.

Step 3

• The WiFi card is found near the bottom of the panel.

The WiFi card is found near the bottom of the panel.

Step 4

• Do not use the metal precision tweezers as shown.
• Using the blunt end of the spudger, wedge the spudger beneath the connector and pull straight up to remove the white wire. Repeat to remove the black connector.
• When reinstalling these U.FL connectors, hold the connector in place and gently push down. The connector should snap into place like a button.

Do not use the metal precision tweezers as shown.

Using the blunt end of the spudger, wedge the spudger beneath the connector and pull straight up to remove the white wire. Repeat to remove the black connector.

When reinstalling these U.FL connectors, hold the connector in place and gently push down. The connector should snap into place like a button.

Step 5

• Remove the two 40 mm screws using a Phillips J0 head screwdriver.
• Lift and remove the WiFi card.

Remove the two 40 mm screws using a Phillips J0 head screwdriver.

Lift and remove the WiFi card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Lucy Mendez                     

Member since: 10/10/2015

152 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Sam Houston State, Team 1-7, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 1-7, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S1G7                     


                                            4 Members                     


                                            5 Guides authored