Difficulty
Difficult
Steps
28
Time Required
20 - 30 minutes
Sections
9
- Battery
- 2 steps
- Back Panel
- 2 steps
- Optical Drive
- 2 steps
- Hard Drive
- 2 steps
- Wifi card
- 3 steps
- Memory
- 2 steps
- Keyboard
- 4 steps
- Fan
- 3 steps
- Motherboard
- 8 steps
Flags
2
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackLenovo IdeaPad N586
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- To unlock the battery, flip the laptop over so that the bottom is facing upward. Then unlock the left clip by pushing the clip to the left.
To unlock the battery, flip the laptop over so that the bottom is facing upward. Then unlock the left clip by pushing the clip to the left.
1024
Step 2
- Now push the right clip to the right and hold it while using your other hand to pull the battery out.
Now push the right clip to the right and hold it while using your other hand to pull the battery out.
Step 3
Back Panel
- Remove the two screws highlighted.
Remove the two screws highlighted.
Step 4
- This is the back of the laptop with the cover removed.
This is the back of the laptop with the cover removed.
Step 5
Optical Drive
- Locate and remove the single screw right of the optical drive
Locate and remove the single screw right of the optical drive
Step 6
- Optical Drive should slide out easily with one thumb’s effort.
Optical Drive should slide out easily with one thumb’s effort.
Step 7
Hard Drive
- Now remove the last two screws highlighted
Now remove the last two screws highlighted
Step 8
- Push hard drive away from the center of the chassis.
- Lift the hard drive out of the chassis using the tab located on the drive.
Push hard drive away from the center of the chassis.
Lift the hard drive out of the chassis using the tab located on the drive.
Step 9
Wifi card
- Remove the white and black wires.
Remove the white and black wires.
Step 10
- Next, unscrew the wifi card
Next, unscrew the wifi card
Step 11
- Pull out the wifi card.
Pull out the wifi card.
Step 12
Memory
- Now push the little clips out away from the memory to unlock the memory.
Now push the little clips out away from the memory to unlock the memory.
Step 13
- After unlocking the memory from it’s position, pull the memory out.
After unlocking the memory from it’s position, pull the memory out.
Step 14
Keyboard
- Remove three screws on bottom of case. They have a little keyboard image next to them. If you don’t do this first, the keyboard will not come off. Place the plastic spudger right under the edge of the keyboard and lift up the keyboard.
Remove three screws on bottom of case. They have a little keyboard image next to them. If you don’t do this first, the keyboard will not come off. Place the plastic spudger right under the edge of the keyboard and lift up the keyboard.
Step 15
- Slowly and gently lift the keyboard up to separate from the chassis.
Slowly and gently lift the keyboard up to separate from the chassis.
Step 16
- Gently lift the keyboard off the chassis.
- Carefully disconnect the keyboard from the laptop by unhooking the keyboard ribbon.
Gently lift the keyboard off the chassis.
Carefully disconnect the keyboard from the laptop by unhooking the keyboard ribbon.
Step 17
- Now remove the keyboard from the computer.
Now remove the keyboard from the computer.
Step 18
Fan
- Pull the plug shown.
Pull the plug shown.
Step 19
- Lift up fan.
- Remove two highlighted screws.
Lift up fan.
Remove two highlighted screws.
Step 20
- This is the fan separated from the motherboard.
This is the fan separated from the motherboard.
Step 21
Motherboard
- Remove all screws shown.
Remove all screws shown.
Step 22
- Flip laptop over.
Flip laptop over.
Step 23
- Remove one more screw hidden under white paper oval sticker (lenovo)
Remove one more screw hidden under white paper oval sticker (lenovo)
Step 24
- Remove keyboard bezel.
Remove keyboard bezel.
Step 25
- Unplug highlighted tabs.
Unplug highlighted tabs.
Step 26
- More tabs need to be removed.
More tabs need to be removed.
Step 27
- Remove final plug connecting motherboard to base of laptop.
Remove final plug connecting motherboard to base of laptop.
Step 28
- This is what the motherboard looks when taken out of the laptop.
This is what the motherboard looks when taken out of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Patrick
Member since: 04/08/2014
453 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 8-7, Regan Spring 2014
Member of Cal Poly, Team 8-7, Regan Spring 2014
CPSU-REGAN-S14S8G7
5 Members
10 Guides authored
Clint Hatchett - Nov 26, 2015
Reply
You cannot must pull up on the keyboard. There are three screws on the bottom of the case that have to be removed first!!
Mdimranh203@gmail.com - Jan 9, 2018
Reply
My laptop open hoi no please tell me why open hoi na please vaia
