Difficulty
Difficult
Steps
13
Time Required
20 - 30 minutes
Sections
5
- Battery
- 2 steps
- Hard Drive
- 2 steps
- Memory
- 2 steps
- Keyboard
- 4 steps
- Fan
- 3 steps
Flags
0
BackLenovo IdeaPad N586
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- To unlock the battery, flip the laptop over so that the bottom is facing upward. Then unlock the left clip by pushing the clip to the left.
To unlock the battery, flip the laptop over so that the bottom is facing upward. Then unlock the left clip by pushing the clip to the left.
1024
Step 2
- Now push the right clip to the right and hold it while using your other hand to pull the battery out.
Now push the right clip to the right and hold it while using your other hand to pull the battery out.
Step 3
Hard Drive
- Now remove the last two screws highlighted
Now remove the last two screws highlighted
Step 4
- Push hard drive away from the center of the chassis.
- Lift the hard drive out of the chassis using the tab located on the drive.
Push hard drive away from the center of the chassis.
Lift the hard drive out of the chassis using the tab located on the drive.
Step 5
Memory
- Now push the little clips out away from the memory to unlock the memory.
Now push the little clips out away from the memory to unlock the memory.
Step 6
- After unlocking the memory from it’s position, pull the memory out.
After unlocking the memory from it’s position, pull the memory out.
Step 7
Keyboard
- Remove three screws on bottom of case. They have a little keyboard image next to them. If you don’t do this first, the keyboard will not come off. Place the plastic spudger right under the edge of the keyboard and lift up the keyboard.
Remove three screws on bottom of case. They have a little keyboard image next to them. If you don’t do this first, the keyboard will not come off. Place the plastic spudger right under the edge of the keyboard and lift up the keyboard.
Step 8
- Slowly and gently lift the keyboard up to separate from the chassis.
Slowly and gently lift the keyboard up to separate from the chassis.
Step 9
- Gently lift the keyboard off the chassis.
- Carefully disconnect the keyboard from the laptop by unhooking the keyboard ribbon.
Gently lift the keyboard off the chassis.
Carefully disconnect the keyboard from the laptop by unhooking the keyboard ribbon.
Step 10
- Now remove the keyboard from the computer.
Now remove the keyboard from the computer.
Step 11
Fan
- Pull the plug shown.
Pull the plug shown.
Step 12
- Lift up fan.
- Remove two highlighted screws.
Lift up fan.
Remove two highlighted screws.
Step 13
- This is the fan separated from the motherboard.
This is the fan separated from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Patrick
Member since: 04/08/2014
453 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 8-7, Regan Spring 2014
Member of Cal Poly, Team 8-7, Regan Spring 2014
CPSU-REGAN-S14S8G7
5 Members
10 Guides authored
Clint Hatchett - Nov 26, 2015
Reply
These instructions are incomplete. There are no steps to getting from removing the keyboard to getting to the fan. There may be more missing.