Lenovo Ideapad Flex 6 14Ikb Ssd Card Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          35 minutes            

Sections

2

• Base Cover
• 2 steps
• SSD Card
• 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLenovo IdeaPad Flex 6-14IKB

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base Cover               

• Remove the ten 6.5 mm screws that secure the base cover using a T5 Torx screwdriver.

Remove the ten 6.5 mm screws that secure the base cover using a T5 Torx screwdriver.

1024

Step 2

• Use the plastic opening tool to pry in the seam between the bottom cover and the rest of the laptop.
• The goal is to unhook the plastic hooks that secure the bottom cover.
• Work your way around the bottom cover of the laptop in a clockwise rotation until every clip is free.
• You will feel and hear a clicking noise when the clips are undone.

Use the plastic opening tool to pry in the seam between the bottom cover and the rest of the laptop.

The goal is to unhook the plastic hooks that secure the bottom cover.

Work your way around the bottom cover of the laptop in a clockwise rotation until every clip is free.

You will feel and hear a clicking noise when the clips are undone.

Step 3

              SSD Card               

• Remove the single 3.5 mm screw that secures the SSD card using a Phillips #00 screwdriver.

Remove the single 3.5 mm screw that secures the SSD card using a Phillips #00 screwdriver.

Step 4

• Use tweezers to gently pry up the protective cover off of the SSD card.

Use tweezers to gently pry up the protective cover off of the SSD card.

Step 5

• Remove the single 3.5 mm screw that secures the SSD card using a Phillips #00 screwdriver.
• The SSD card will spring up to one side on its own.

The SSD card will spring up to one side on its own.

Step 6

• Remove the SSD from the motherboard.
• When reinstalling the SSD, push the SSD card back into its slot. The SSD card will click into place when it is secure and then rest at a 30 degree angle from the laptop.

Remove the SSD from the motherboard.

When reinstalling the SSD, push the SSD card back into its slot. The SSD card will click into place when it is secure and then rest at a 30 degree angle from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Nico Magtoto                     

Member since: 01/09/2022

489 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Illinois Wesleyan University, Team 1-2, Bullock Spring 2022                        

                                                  Member of Illinois Wesleyan University, Team 1-2, Bullock Spring 2022 



                    IWU-BULLOCK-S22S1G2                     


                                            4 Members                     


                                            7 Guides authored