Difficulty
Moderate
Steps
2
Time Required
5 minutes
Sections
1
- Base Cover
- 2 steps
Flags
0
BackLenovo IdeaPad Flex 6-14IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Cover
- Remove the ten 6.5 mm screws that secure the base cover using a T5 Torx screwdriver.
Remove the ten 6.5 mm screws that secure the base cover using a T5 Torx screwdriver.
1024
Step 2
- Use the plastic opening tool to pry in the seam between the bottom cover and the rest of the laptop.
- The goal is to unhook the plastic hooks that secure the bottom cover.
- Work your way around the bottom cover of the laptop in a clockwise rotation until every clip is free.
- You will feel and hear a clicking noise when the clips are undone.
Use the plastic opening tool to pry in the seam between the bottom cover and the rest of the laptop.
The goal is to unhook the plastic hooks that secure the bottom cover.
Work your way around the bottom cover of the laptop in a clockwise rotation until every clip is free.
You will feel and hear a clicking noise when the clips are undone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Ryan Reish
Member since: 01/09/2022
363 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Illinois Wesleyan University, Team 1-2, Bullock Spring 2022
Member of Illinois Wesleyan University, Team 1-2, Bullock Spring 2022
IWU-BULLOCK-S22S1G2
4 Members
7 Guides authored
