Lenovo Ideapad Flex 5 1570 Ram Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Back Panel
3 steps
Battery Disconnect
1 step
RAM
2 steps

Flags

BackLenovo IdeaPad Flex 5-1570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Remove the ten 5 mm Phillips #00 screws that are holding the back panel on.

Remove the ten 5 mm Phillips #00 screws that are holding the back panel on.

1024

Step 2

Use a spudger to pry open the back case at the two hinge cutouts.
Gently use the plastic opening tool around the edges of the laptop to pry up the clips holding the rest of the back panel.

Use a spudger to pry open the back case at the two hinge cutouts.

Gently use the plastic opening tool around the edges of the laptop to pry up the clips holding the rest of the back panel.

Step 3

Once all the clips have been disengaged, lift off the back cover.

Once all the clips have been disengaged, lift off the back cover.

Step 4

              Battery Disconnect

Using your fingers, grasp the entire bundle of wires to pull the battery cable from its connector. This will cut off power to the motherboard.
Be sure to apply even pressure across the wires and connector to not damage the battery cable.

Using your fingers, grasp the entire bundle of wires to pull the battery cable from its connector. This will cut off power to the motherboard.

Be sure to apply even pressure across the wires and connector to not damage the battery cable.

Step 5

RAM

Push the two tabs on both sides of the RAM stick apart to release the memory module.
The RAM will rise up to rest at an angle to the motherboard.

Push the two tabs on both sides of the RAM stick apart to release the memory module.

The RAM will rise up to rest at an angle to the motherboard.

Step 6

Pull the RAM stick out of its port with respect to the angle at which it rests.
Be sure to handle the edges of the RAM card, as the oil on your skin can have damaging effects to the circuits or pins.

Pull the RAM stick out of its port with respect to the angle at which it rests.

Be sure to handle the edges of the RAM card, as the oil on your skin can have damaging effects to the circuits or pins.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Austin Blakely

Member since: 03/11/2019

16,291 Reputation

                                      52 Guides authored                  



                       Badges:
                       37







                                                        +34 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team