Difficulty
Moderate
Steps
5
Time Required
3 minutes
Sections
2
- Back Panel
- 3 steps
- Hard Drive
- 2 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackLenovo IdeaPad Flex 5-1570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the ten 5 mm Phillips #00 screws that are holding the back panel on.
Remove the ten 5 mm Phillips #00 screws that are holding the back panel on.
1024
Step 2
- Use a spudger to pry open the back case at the two hinge cutouts.
- Gently use the plastic opening tool around the edges of the laptop to pry up the clips holding the rest of the back panel.
Use a spudger to pry open the back case at the two hinge cutouts.
Gently use the plastic opening tool around the edges of the laptop to pry up the clips holding the rest of the back panel.
Step 3
- Once all the clips have been disengaged, lift off the back cover.
Once all the clips have been disengaged, lift off the back cover.
Step 4
Hard Drive
- Remove the three 5 mm Phillips #00 screws that secure the hard drive.
Remove the three 5 mm Phillips #00 screws that secure the hard drive.
Step 5
- Using your hands, gently pull the hard drive back, sliding it out from the port.
Using your hands, gently pull the hard drive back, sliding it out from the port.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jeremy Schwartz
Member since: 01/23/2020
85 Reputation
1 Guide authored
Badges:
3
Team
Cal Poly, Team S2-G6, White Winter 2020
Member of Cal Poly, Team S2-G6, White Winter 2020
CPSU-WHITE-W20S2G6
4 Members
13 Guides authored
jbechtel1 - Apr 23, 2022
Reply
How do I get whats on my hard drive to the new ssd?