Difficulty
Easy
Steps
3
Time Required
3 minutes
Sections
1
- Back Panel
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLenovo IdeaPad Flex 5 14ARE05
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the five 8 mm screws using a T5 Torx Screwdriver.
- Remove the four 5 mm screws using a T5 Torx Screwdriver.
Remove the five 8 mm screws using a T5 Torx Screwdriver.
Remove the four 5 mm screws using a T5 Torx Screwdriver.
1024
Step 2
- Use a small suction cup to pull open the back case at the two hinge cutouts.
- Gently, use the plastic opening tool around the edges of the laptop to pry up the rest of the back panel.
Use a small suction cup to pull open the back case at the two hinge cutouts.
Gently, use the plastic opening tool around the edges of the laptop to pry up the rest of the back panel.
Step 3
- Once all the clips have been disengaged, lift off the back cover.
Once all the clips have been disengaged, lift off the back cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 1 other contributor
Tyler Schrock
Member since: 11/02/2020
326 Reputation
2 Guides authored
Badges:
4
+1 more badge
Timothy Alper - Oct 4, 2022
Reply
This guide has been very helpful but I have a problem with missing screws 3 have fallen out now. and I see the guide doesn’t list any parts so where could I go to find the screws?