Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes            

Sections

3

  • Back Panel
  • 2 steps
  • Battery
  • 2 steps
  • Speaker
  • 2 steps

Flags

0

  • BackLenovo IdeaPad Flex 5-1470

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before using this guide, ensure that the volume of the speakers is on and not muted to see if the sound still does not work. Faulty speakers can still produce distorted sound.

Steps 3 and 4 will have you remove the battery first because the wires that connect the speaker to the motherboard run from underneath the battery.

What you need

Step 1

              Back Panel               
  • Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

1024

Step 2

  • Use the plastic opening tool to lift up and remove the casing.

Use the plastic opening tool to lift up and remove the casing.

Step 3

              Battery               
  • Remove the two 3.6 mm Phillips #00 battery screws located in the lower left corner of the device.

Remove the two 3.6 mm Phillips #00 battery screws located in the lower left corner of the device.

Step 4

  • Gently unplug the multi-colored cable connecting the battery to the motherboard.
  • Remove the battery from the laptop.

Gently unplug the multi-colored cable connecting the battery to the motherboard.

Remove the battery from the laptop.

Step 5

              Speaker               
  • Remove the two speakers from their compartment. The speakers are held in the bottom corners of the device.

Remove the two speakers from their compartment. The speakers are held in the bottom corners of the device.

Step 6

  • Carefully unplug two wired connections from the motherboard using nylon tip reverse tweezers.

Carefully unplug two wired connections from the motherboard using nylon tip reverse tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Ryan Beste                     

Member since: 01/23/2020

141 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Cal Poly, Team S2-G5, White Winter 2020                        

                                                  Member of Cal Poly, Team S2-G5, White Winter 2020 



                    CPSU-WHITE-W20S2G5                     


                                            4 Members                     


                                            15 Guides authored