Difficulty
Moderate
Steps
5
Time Required
25 minutes
Sections
2
- Back Panel
- 2 steps
- RAM
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo IdeaPad Flex 5-1470
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Back Panel
- Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.
Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.
1024
Step 2
- Use the plastic opening tool to lift up and remove the casing.
Use the plastic opening tool to lift up and remove the casing.
Step 3
RAM
- Use a spudger to gently bend down the locking tabs on the RAM casing.
Use a spudger to gently bend down the locking tabs on the RAM casing.
Step 4
- Use a spudger to gently lift the RAM casing, then lift it up and off.
Use a spudger to gently lift the RAM casing, then lift it up and off.
Step 5
- Gently take hold of the RAM card and lift slightly.
- Pull the RAM card directly out of its port.
Gently take hold of the RAM card and lift slightly.
Pull the RAM card directly out of its port.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Gavin B
Member since: 02/10/2022
147 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
The Citadel Military College of South Carolina, Team 1-5, Eggleston Spring 2022
Member of The Citadel Military College of South Carolina, Team 1-5, Eggleston Spring 2022
CMCSC-EGGLESTON-S22S1G5
3 Members
3 Guides authored
