Difficulty

Moderate

Steps

6

Time Required

                          20 - 25 minutes

Sections

3

  • Back Panel
  • 2 steps
  • SSD
  • 1 step
  • Motherboard
  • 3 steps

Flags

0

  • BackLenovo IdeaPad Flex 5-1470

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

1024

Step 2

  • Use the plastic opening tool to lift up and remove the casing.

Use the plastic opening tool to lift up and remove the casing.

Step 3

              SSD
  • Remove the single 3.6 mm screw using a Phillips #00 screwdriver.
  • The SSD will pop up on its own after removing the screw.

Remove the single 3.6 mm screw using a Phillips #00 screwdriver.

The SSD will pop up on its own after removing the screw.

Step 4

              Motherboard
  • Use a Phillips #00 screwdriver to remove the three screws securing the fan.
  • Lift the fan up and out.
  • Use a Phillips #00 screwdriver to remove the three screws securing the hard drive.
  • Lift the hard drive up and out.

Use a Phillips #00 screwdriver to remove the three screws securing the fan.

Lift the fan up and out.

Use a Phillips #00 screwdriver to remove the three screws securing the hard drive.

Lift the hard drive up and out.

Step 5

  • Use a Phillips #00 screwdriver to remove the single screw securing the Wi-Fi card.
  • The Wi-Fi card will slightly lift away from the motherboard.
  • Pull the Wi-Fi card directly out of its port.

Use a Phillips #00 screwdriver to remove the single screw securing the Wi-Fi card.

The Wi-Fi card will slightly lift away from the motherboard.

Pull the Wi-Fi card directly out of its port.

Step 6

  • Use a Phillips #00 screwdriver to remove the three screws securing the motherboard.
  • Gently disconnect the cables and ribbon cables connected to the motherboard.

Use a Phillips #00 screwdriver to remove the three screws securing the motherboard.

Gently disconnect the cables and ribbon cables connected to the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Randall Welton

Member since: 02/11/2022

229 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       The Citadel Military College of South Carolina, Team 1-5, Eggleston Spring 2022                        

                                                  Member of The Citadel Military College of South Carolina, Team 1-5, Eggleston Spring 2022 



                    CMCSC-EGGLESTON-S22S1G5                     


                                            3 Members                     


                                            3 Guides authored