Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
2
- Back Panel
- 3 steps
- Speakers
- 2 steps
Flags
0
BackLenovo Ideapad Flex 4-1570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Shut down and unplug your laptop before you begin.
Shut down and unplug your laptop before you begin.
1024
Step 2
- Remove the nine 6 mm screws using a T5 Torx Screwdriver.
- Remove the two 10 mm screws using a T5 Torx Screwdriver.
Remove the nine 6 mm screws using a T5 Torx Screwdriver.
Remove the two 10 mm screws using a T5 Torx Screwdriver.
Step 3
- Use a plastic opening tool to carefully pry off the back cover.
- Remove the back cover.
Use a plastic opening tool to carefully pry off the back cover.
Remove the back cover.
Step 4
Speakers
- Lift up on each speaker, one by one. The speaker should lift up with ease.
Lift up on each speaker, one by one. The speaker should lift up with ease.
Step 5
- Unwind the speaker wire from the plastic brackets. Once you have the wire completely unwinded, use two blue iFixit tools to disconnect the speaker chip from the motherboard.
Unwind the speaker wire from the plastic brackets. Once you have the wire completely unwinded, use two blue iFixit tools to disconnect the speaker chip from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Isaiah Vang
Member since: 10/04/2018
645 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
UW Stout, Team S6-G6, Ogden Fall 2018
Member of UW Stout, Team S6-G6, Ogden Fall 2018
UWSTOUT-OGDEN-F18S6G6
4 Members
16 Guides authored