Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
2
- Back Panel
- 3 steps
- Cooling Fan
- 3 steps
Flags
0
BackLenovo Ideapad Flex 4-1570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Shut down and unplug your laptop before you begin.
Shut down and unplug your laptop before you begin.
1024
Step 2
- Remove the nine 6 mm screws using a T5 Torx Screwdriver.
- Remove the two 10 mm screws using a T5 Torx Screwdriver.
Remove the nine 6 mm screws using a T5 Torx Screwdriver.
Remove the two 10 mm screws using a T5 Torx Screwdriver.
Step 3
- Use a plastic opening tool to carefully pry off the back cover.
- Remove the back cover.
Use a plastic opening tool to carefully pry off the back cover.
Remove the back cover.
Step 4
Cooling Fan
- Remove the three 5mm screws using the T5 Torx Screwdriver.
Remove the three 5mm screws using the T5 Torx Screwdriver.
Step 5
- Pull black wire and gray wire away from cooling fan clips using the tweezers.
Pull black wire and gray wire away from cooling fan clips using the tweezers.
Step 6
- Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.
Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Isaiah Vang
Member since: 10/04/2018
645 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
UW Stout, Team S6-G6, Ogden Fall 2018
Member of UW Stout, Team S6-G6, Ogden Fall 2018
UWSTOUT-OGDEN-F18S6G6
4 Members
16 Guides authored