Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
2
- Back Panel
- 3 steps
- Battery
- 3 steps
Flags
0
BackLenovo Ideapad Flex 4-1570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Shut down and unplug your laptop before you begin.
Shut down and unplug your laptop before you begin.
1024
Step 2
- Remove the nine 6 mm screws using a T5 Torx Screwdriver.
- Remove the two 10 mm screws using a T5 Torx Screwdriver.
Remove the nine 6 mm screws using a T5 Torx Screwdriver.
Remove the two 10 mm screws using a T5 Torx Screwdriver.
Step 3
- Use a plastic opening tool to carefully pry off the back cover.
- Remove the back cover.
Use a plastic opening tool to carefully pry off the back cover.
Remove the back cover.
Step 4
Battery
- Disconnect the battery by using a plastic opening tool or your fingers to push the connector towards the battery.
- Do not pry or pull on the socket itself or you risk damaging the motherboard.
Disconnect the battery by using a plastic opening tool or your fingers to push the connector towards the battery.
Do not pry or pull on the socket itself or you risk damaging the motherboard.
Step 5
- Remove the three 4 mm screws using a T5 Torx Screwdriver.
Remove the three 4 mm screws using a T5 Torx Screwdriver.
Step 6
- Remove the battery.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 7 other contributors
Isaiah Vang
Member since: 10/04/2018
645 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
UW Stout, Team S6-G6, Ogden Fall 2018
Member of UW Stout, Team S6-G6, Ogden Fall 2018
UWSTOUT-OGDEN-F18S6G6
4 Members
16 Guides authored
