Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes            

Sections

2

  • Lower Case
  • 2 steps
  • USB/SD Card Hub
  • 3 steps

Flags

0

  • BackLenovo IdeaPad Flex 4-1470

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lower Case               
  • Ensure your computer is completely OFF before starting this guide.
  • Remove the eight 6 mm screws using a Phillips #0 screwdriver.
  • Remove the two 11 mm screws using a Phillips #0 screwdriver.

Ensure your computer is completely OFF before starting this guide.

Remove the eight 6 mm screws using a Phillips #0 screwdriver.

Remove the two 11 mm screws using a Phillips #0 screwdriver.

1024

Step 2

  • Pry the back cover off by inserting the plastic opening tool at the hinges and wedging it between the Back cover and the body.
  • Follow along the back edge with the plastic opening tool, lifting the cover off as you go. It is normal to hear snapping/clicking sounds as the back cover is held on by clips.
  • Remove the cover.

Pry the back cover off by inserting the plastic opening tool at the hinges and wedging it between the Back cover and the body.

Follow along the back edge with the plastic opening tool, lifting the cover off as you go. It is normal to hear snapping/clicking sounds as the back cover is held on by clips.

Remove the cover.

Step 3

              USB/SD Card Hub               
  • Remove the 4mm screw with a JIS #0 screwdriver.

Remove the 4mm screw with a JIS #0 screwdriver.

Step 4

  • Remove the ribbon cable.

Remove the ribbon cable.

Step 5

  • Remove the existing USB hub and replace it with the new hub.

Remove the existing USB hub and replace it with the new hub.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Elijah Ellis                     

Member since: 11/08/2018

586 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team S5-G2, Gulbrandsen Fall 2018                        

                                                  Member of UMass Dartmouth, Team S5-G2, Gulbrandsen Fall 2018 



                    UMASSD-GULBRANDSEN-F18S5G2                     


                                            3 Members                     


                                            5 Guides authored