Lenovo Ideapad Flex 4 1470 Cooling Fan Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 - 15 minutes            

Sections

2

• Lower Case
• 2 steps
• Cooling Fan
• 3 steps

Flags

0

• BackLenovo IdeaPad Flex 4-1470

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Lower Case               

• Ensure your computer is completely OFF before starting this guide.
• Remove the eight 6 mm screws using a Phillips #0 screwdriver.
• Remove the two 11 mm screws using a Phillips #0 screwdriver.

Ensure your computer is completely OFF before starting this guide.

Remove the eight 6 mm screws using a Phillips #0 screwdriver.

Remove the two 11 mm screws using a Phillips #0 screwdriver.

1024

Step 2

• Pry the back cover off by inserting the plastic opening tool at the hinges and wedging it between the Back cover and the body.
• Follow along the back edge with the plastic opening tool, lifting the cover off as you go. It is normal to hear snapping/clicking sounds as the back cover is held on by clips.
• Remove the cover.

Pry the back cover off by inserting the plastic opening tool at the hinges and wedging it between the Back cover and the body.

Follow along the back edge with the plastic opening tool, lifting the cover off as you go. It is normal to hear snapping/clicking sounds as the back cover is held on by clips.

Remove the cover.

Step 3

              Cooling Fan               

• Remove the two 4 mm Phillips #0 screws which mount the fan.

Remove the two 4 mm Phillips #0 screws which mount the fan.

Step 4

• Using the Precision Tweezers, remove the 2 gray wires around the fan from their clips.

Using the Precision Tweezers, remove the 2 gray wires around the fan from their clips.

Step 5

• Use 2 plastic opening tools to remove the fans power wire from the Mother board and remove the fan.
• Lift the cooling fan out of the laptop.

Use 2 plastic opening tools to remove the fans power wire from the Mother board and remove the fan.

Lift the cooling fan out of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Demario Robinson                     

Member since: 10/02/2017

1,002 Reputation

                                      4 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges                           

Team

                       USF Tampa, Team S1-G6, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S1-G6, Thompson Fall 2017 



                    USFT-THOMPSON-F17S1G6                     


                                            3 Members                     


                                            10 Guides authored                     

Rajeshwar Choudhary - Aug 15, 2019

Reply

will the same fan fit to lenovo ideapad flex 5 1470 ?