Lenovo Ideapad Flex 4 1470 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          7 - 10 minutes

Sections

Lower Case
2 steps
Battery
3 steps

Flags

BackLenovo IdeaPad Flex 4-1470
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

You may need to replace your battery if you find that your Laptop dies very quickly or immediately once disconnected from the power adapter. This will eventually happen to most laptops as the act of charging and discharging a battery deteriorates its ability to store a charge.

What you need

Step 1

              Lower Case

Ensure your computer is completely OFF before starting this guide.
Remove the eight 6 mm screws using a Phillips #0 screwdriver.
Remove the two 11 mm screws using a Phillips #0 screwdriver.

Ensure your computer is completely OFF before starting this guide.

Remove the eight 6 mm screws using a Phillips #0 screwdriver.

Remove the two 11 mm screws using a Phillips #0 screwdriver.

1024

Step 2

Pry the back cover off by inserting the plastic opening tool at the hinges and wedging it between the Back cover and the body.
Follow along the back edge with the plastic opening tool, lifting the cover off as you go. It is normal to hear snapping/clicking sounds as the back cover is held on by clips.
Remove the cover.

Pry the back cover off by inserting the plastic opening tool at the hinges and wedging it between the Back cover and the body.

Follow along the back edge with the plastic opening tool, lifting the cover off as you go. It is normal to hear snapping/clicking sounds as the back cover is held on by clips.

Remove the cover.

Step 3

              Battery

Disconnect the battery connector by using a plastic pry tool or your fingers to push the cable right towards the battery.
Do not pry or push on the socket itself or you risk damaging the motherboard.

Disconnect the battery connector by using a plastic pry tool or your fingers to push the cable right towards the battery.

Do not pry or push on the socket itself or you risk damaging the motherboard.

Step 4

Remove the three 4 mm Phillips #0 screws holding the battery in place.

Remove the three 4 mm Phillips #0 screws holding the battery in place.

Step 5

Lift the battery up and out of the laptop.

Lift the battery up and out of the laptop.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 8 other contributors

                    Demario Robinson

Member since: 10/02/2017

1,002 Reputation

                                      4 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       USF Tampa, Team S1-G6, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S1-G6, Thompson Fall 2017 



                    USFT-THOMPSON-F17S1G6                     


                                            3 Members                     


                                            10 Guides authored

pama - Feb 17, 2019

thank for sharing this! I want to check if it is easy to swap HDD/SSD?

iamelara - Aug 1, 2022

I’m grateful for the individuals who take time to share their knowledge. I’m 63yrs young with no technical skills. I followed your step by step instructions and was successful in changing my laptop battery. THANK YOU! 👩‍🦳👍

Introduction#

What you need#

Team#

Introduction

What you need

Team