Difficulty
Moderate
Steps
10
Time Required
25 minutes
Sections
2
- Battery
- 5 steps
- Motherboard
- 5 steps
Flags
0
BackLenovo IdeaPad Flex 4-1130
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
- Remove the ten 4mm screws from the back panel.
Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
Remove the ten 4mm screws from the back panel.
1024
Step 2
- Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
- Do not insert the spudger too deep! This could potentially damage a device part.
Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
Do not insert the spudger too deep! This could potentially damage a device part.
Step 3
- Remove the connector attaching the battery to the motherboard.
Remove the connector attaching the battery to the motherboard.
Step 4
- Remove the four 4mm screws on the battery.
Remove the four 4mm screws on the battery.
Step 5
- Lift the battery with a spudger and remove.
Lift the battery with a spudger and remove.
Step 6
Motherboard
- Remove eleven 6mm screws.
Remove eleven 6mm screws.
Step 7
- Lift up black flap on the ZIF connector and pull the ribbon cable out.
Lift up black flap on the ZIF connector and pull the ribbon cable out.
Step 8
- Lift up on the black tab on the ZIF connector and pull the ribbon cable out.
Lift up on the black tab on the ZIF connector and pull the ribbon cable out.
Step 9
- Remove connector cable.
Remove connector cable.
Step 10
- Remove one last connector cable.
- Motherboard should now be completely disconnected and can be lifted off the cover to be replaced.
Remove one last connector cable.
Motherboard should now be completely disconnected and can be lifted off the cover to be replaced.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Adrian Miranda
Member since: 02/15/2018
677 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
USF Tampa, Team S17-G5, Boczar Spring 2018
Member of USF Tampa, Team S17-G5, Boczar Spring 2018
USFT-BOCZAR-S18S17G5
3 Members
5 Guides authored
