Lenovo Ideapad A1 07 Battery Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

2

• Back Cover/Midframe
• 3 steps
• Battery
• 1 step

Flags

1

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackLenovo IdeaPad A1-07

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover/Midframe               

• With the blue plastic opening tool, use the lock screen switch by the volume button as an access point to gently lift the back cover off.
• Wedge the opening tool until you start hearing the back cover popping off the body of the device.
• Slide the opening tool down the length of the device.
• Once it is about half way off, you can use your thumb to pull the rest of the back cover off.

With the blue plastic opening tool, use the lock screen switch by the volume button as an access point to gently lift the back cover off.

Wedge the opening tool until you start hearing the back cover popping off the body of the device.

Slide the opening tool down the length of the device.

Once it is about half way off, you can use your thumb to pull the rest of the back cover off.

1024

Step 2

• Using a Phillips #000 screwdriver, remove all 18 of the 4mm screws.
• With the blue plastic opening tool, gently wedge the tool between the screen and the gray frame until you feel resistance.
• Do not force the frame off because you can break off the teeth securing the frame to the screen.
• Push in the teeth with the blue plastic opening tool, towards the center of the device, and gently pull off the frame.
• The gray frame will still be connected to the device by a pair of wires from the motherboard to the speaker.

Using a Phillips #000 screwdriver, remove all 18 of the 4mm screws.

With the blue plastic opening tool, gently wedge the tool between the screen and the gray frame until you feel resistance.

Do not force the frame off because you can break off the teeth securing the frame to the screen.

Push in the teeth with the blue plastic opening tool, towards the center of the device, and gently pull off the frame.

The gray frame will still be connected to the device by a pair of wires from the motherboard to the speaker.

Step 3

• The speaker in the grey frame is connected to the motherboard by the white plastic connector.
• Disconnect the speaker by separating the two sides of the speaker connector.

The speaker in the grey frame is connected to the motherboard by the white plastic connector.

Disconnect the speaker by separating the two sides of the speaker connector.

Step 4

              Battery               

• Use a plastic opening tool to push the white battery connector out of its socket on the motherboard.
• Lift the battery away from the device.

Use a plastic opening tool to push the white battery connector out of its socket on the motherboard.

Lift the battery away from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Madison Cranmer                     

Member since: 04/10/2017

370 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Eastern Washington University, Team S1-G4, Crane Spring 2017                        

                                                  Member of Eastern Washington University, Team S1-G4, Crane Spring 2017 



                    EWU-CRANE-S17S1G4                     


                                            4 Members                     


                                            4 Guides authored