Lenovo Ideapad A1 07 Back Cover Midframe Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Back Cover/Midframe
3 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

BackLenovo IdeaPad A1-07
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover/Midframe

With the blue plastic opening tool, use the lock screen switch by the volume button as an access point to gently lift the back cover off.
Wedge the opening tool until you start hearing the back cover popping off the body of the device.
Slide the opening tool down the length of the device.
Once it is about half way off, you can use your thumb to pull the rest of the back cover off.

With the blue plastic opening tool, use the lock screen switch by the volume button as an access point to gently lift the back cover off.

Wedge the opening tool until you start hearing the back cover popping off the body of the device.

Slide the opening tool down the length of the device.

Once it is about half way off, you can use your thumb to pull the rest of the back cover off.

1024

Step 2

Using a Phillips #000 screwdriver, remove all 18 of the 4mm screws.
With the blue plastic opening tool, gently wedge the tool between the screen and the gray frame until you feel resistance.
Do not force the frame off because you can break off the teeth securing the frame to the screen.
Push in the teeth with the blue plastic opening tool, towards the center of the device, and gently pull off the frame.
The gray frame will still be connected to the device by a pair of wires from the motherboard to the speaker.

Using a Phillips #000 screwdriver, remove all 18 of the 4mm screws.

With the blue plastic opening tool, gently wedge the tool between the screen and the gray frame until you feel resistance.

Do not force the frame off because you can break off the teeth securing the frame to the screen.

Push in the teeth with the blue plastic opening tool, towards the center of the device, and gently pull off the frame.

The gray frame will still be connected to the device by a pair of wires from the motherboard to the speaker.

Step 3

The speaker in the grey frame is connected to the motherboard by the white plastic connector.
Disconnect the speaker by separating the two sides of the speaker connector.

The speaker in the grey frame is connected to the motherboard by the white plastic connector.

Disconnect the speaker by separating the two sides of the speaker connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Madison Cranmer

Member since: 04/10/2017

370 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Eastern Washington University, Team S1-G4, Crane Spring 2017                        

                                                  Member of Eastern Washington University, Team S1-G4, Crane Spring 2017 



                    EWU-CRANE-S17S1G4                     


                                            4 Members                     


                                            4 Guides authored

Slice and Dice#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Slice and Dice

Introduction

What you need

Team