Lenovo Ideapad 330S Ram Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 - 20 minutes            

Sections

1

• RAM
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackLenovo IdeaPad 330S-15IKB

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The battery for this device is not easily accessible and will require opening the device. Before you begin your replacement, be sure to disconnect the laptop from any power source. Additionally, we recommend that you turn off the device wait 5 minutes.

If you live in area rich of Static Electricity please advise using an ESD Strap.

What you need

Step 1

              Removing bottom case               

• Please turn off the laptop before opening the device
• Remove the 10 screws as shown in the picture.
• Gently using the tool pry off the bottom case

Please turn off the laptop before opening the device

Remove the 10 screws as shown in the picture.

Gently using the tool pry off the bottom case

1024

Step 2

              Disconnecting Battery               

• Using a spudger gently push the plastic connector to the left in order to disconnect the battery. wisdom here.

Using a spudger gently push the plastic connector to the left in order to disconnect the battery. wisdom here.

Step 3

              Removing Black Case               

• Remove these screws as show in picture
• Gently pry out the black case.
• Note that one of the screws are Philips 2.5 and not Philips (the black screw top right ).

Remove these screws as show in picture

Gently pry out the black case.

Note that one of the screws are Philips 2.5 and not Philips (the black screw top right ).

Step 4

              Removing Ram Stick               

• Gently using heavy duty spuder remove the old memory

Gently using heavy duty spuder remove the old memory

Step 5

              Installing Ram Stick               

• Arrange the new ram stick accoring the pin on the motherboard
• Push Gently on the stick until you hear two clicks

Arrange the new ram stick accoring the pin on the motherboard

Push Gently on the stick until you hear two clicks

To reassemble the device, install your new stick(s) and follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Ilia Tocheny                     

Member since: 04/30/2019

1,124 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Nathan D’souza - Aug 19, 2020

Reply

Is it possible to upgrade the cpu of my lenovo 330s which is a core i3 7gen to say a core i5 10th gen

Ilia Tocheny - Aug 19, 2020

Reply

Only by replacement or the Motherboard…

The CPU is soldered to the M.B. and cannot upgraded easily

Muromi - Sep 19, 2020

Reply

Hallo.

I am Japanese Hegt Stuident.

Do I need to remove the battery when removing the RAM?

（こんにちは。

日本の高校生です。

RAMを外すとき、バッテリーは外す必要がありますか？）

Ilia Tocheny - Sep 19, 2020

You can disconnect the battery no need of removing it.

Ilia Tocheny - Sep 19, 2020

Reply

I just Updated the repair guide of memory replacement.