Difficulty
Easy
Steps
5
Time Required
10 - 15 minutes
Sections
2
- Bottom Case
- 2 steps
- Wi-Fi Card
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo IdeaPad 330-15ARR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Case
- Remove all Phillips #0 screws securing the case to the laptop.
Remove all Phillips #0 screws securing the case to the laptop.
1024
Step 2
- Pry all edges off of the laptop with the opening tool until the bottom case releases.
- Remove the bottom case.
Pry all edges off of the laptop with the opening tool until the bottom case releases.
Remove the bottom case.
Step 3
Wi-Fi Card
- Remove the two Wi-Fi card’s connections by gently lifting up on the connectors.
Remove the two Wi-Fi card’s connections by gently lifting up on the connectors.
Step 4
- Remove the single Phillips #0 screw securing the Wi-Fi card.
Remove the single Phillips #0 screw securing the Wi-Fi card.
Step 5
- Slide the Wi-Fi card out of its port on the motherboard.
- Do not worry about the angle the card sits after removing the mounting screw - this is how it’s meant to be connected and will have to be connected similarly during reassembly.
Slide the Wi-Fi card out of its port on the motherboard.
Do not worry about the angle the card sits after removing the mounting screw - this is how it’s meant to be connected and will have to be connected similarly during reassembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Brayden Fleming
Member since: 09/22/2022
479 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
University of North Texas, Team 3-2, Saru Jimmy Fall 2022
Member of University of North Texas, Team 3-2, Saru Jimmy Fall 2022
UNT-SARU JIMMY-F22S3G2
4 Members
3 Guides authored