Difficulty

Moderate

Steps

3

Time Required

                          15 minutes            

Sections

1

  • Memory RAM
  • 3 steps

Flags

0

  • BackLenovo Ideapad 320-15IAP

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Memory RAM               
  • Unscrew thirteen 6.5mm screws from the back panel with the Phillips #0 screwdriver.
  • Pull the CD tray out with an opening tool once all of the screws are removed.
  • Use the opening tool to pull the case off the laptop by prying up the back panel along the edges of the computer.

Unscrew thirteen 6.5mm screws from the back panel with the Phillips #0 screwdriver.

Pull the CD tray out with an opening tool once all of the screws are removed.

Use the opening tool to pull the case off the laptop by prying up the back panel along the edges of the computer.

1024

Step 2

  • Remove the silver RAM cover by lifting it directly up.

Remove the silver RAM cover by lifting it directly up.

Step 3

  • Gently pull the metal holders on each side of the memory card away from each other and the card should pop up to rest at an angle to the motherboard.
  • Pull the memory card straight out of its socket with respect to the angle it now rests.
  • When reinserting the replacement RAM card, be sure to slide it in gently at the same angle at which the old one rested, then press the outer edge down until the clips on either side have clasped around it.

Gently pull the metal holders on each side of the memory card away from each other and the card should pop up to rest at an angle to the motherboard.

Pull the memory card straight out of its socket with respect to the angle it now rests.

When reinserting the replacement RAM card, be sure to slide it in gently at the same angle at which the old one rested, then press the outer edge down until the clips on either side have clasped around it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Franco Criscola                     

Member since: 01/30/2020

779 Reputation

                                      6 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S17-G11, Lamothe Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S17-G11, Lamothe Spring 2020 



                    ERAU-LAMOTHE-S20S17G11                     


                                            4 Members                     


                                            6 Guides authored