Difficulty
Moderate
Steps
5
Time Required
5 - 15 minutes
Sections
1
- Battery
- 5 steps
Flags
Scenic Route
This guide’s procedure isn’t the most efficient way to get the job done, but still may be useful in some circumstances.
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackLenovo IdeaPad 310 Touch-15ISK
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop over and remove the 13 Phillips #1 screws from the bottom panel.
- Remove the 3 Phillips #1 screws holding RAM panel in and then remove RAM panel
Flip the laptop over and remove the 13 Phillips #1 screws from the bottom panel.
Remove the 3 Phillips #1 screws holding RAM panel in and then remove RAM panel
1024
Step 2
- Disconnect keyboard and touchpad wire using a soft pry bar.
- Remove CD port.
Disconnect keyboard and touchpad wire using a soft pry bar.
Remove CD port.
Step 3
- Flip laptop back over.
- Using a plastic spudger, pry between the keyboard panel and bottom panel on all 4 sides.
Flip laptop back over.
Using a plastic spudger, pry between the keyboard panel and bottom panel on all 4 sides.
Step 4
- Remove the 4 Phillips #0 screws holding the motherboard to the computer.
- Disconnect the fan tab on the bottom of the motherboard.
- Remove the 5 tabs holding the motherboard to the computer and remove the motherboard.
Remove the 4 Phillips #0 screws holding the motherboard to the computer.
Disconnect the fan tab on the bottom of the motherboard.
Remove the 5 tabs holding the motherboard to the computer and remove the motherboard.
Step 5
- Unscrew the 2 Phillips #0 screws holding the battery in place.
- Remove wire tab holding battery in place.
- Carefully remove battery.
Unscrew the 2 Phillips #0 screws holding the battery in place.
Remove wire tab holding battery in place.
Carefully remove battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 6 other contributors
Cam Plute
Member since: 09/26/2017
225 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
Washington State, Team S5-G7, Phelps-Hillen Fall 2017
Member of Washington State, Team S5-G7, Phelps-Hillen Fall 2017
WSU-PHELPS-HILLEN-F17S5G7
4 Members
8 Guides authored
Ronn Richardson - Nov 19, 2019
Reply
Step 2 should include removing connectors for the wireless card.
Zacharie Troletti-Gillot - Jan 24, 2020
The fan should also be disconnected in step 2 not step 4.
Denveer - Dec 13, 2019
Reply
WWow It’s Great
