Difficulty

Moderate

Steps

8

Time Required

                          25 minutes

Sections

1

  • Trackpad
  • 8 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo IdeaPad 130S-11IGM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Trackpad
  • Power down the device and disconnect the power cable.
  • Remove the ten screws from the back panel using a T5 Torx screwdriver.

Power down the device and disconnect the power cable.

Remove the ten screws from the back panel using a T5 Torx screwdriver.

1024

Step 2

  • Use an iFixit opening tool to detach the clips on the top side of the back panel.
  • After unclipping the top part of the panel, use your hands to gently unclip the rest of the panel.
  • Remove the back panel from the laptop.

Use an iFixit opening tool to detach the clips on the top side of the back panel.

After unclipping the top part of the panel, use your hands to gently unclip the rest of the panel.

Remove the back panel from the laptop.

Step 3

  • Unplug the battery connection from the motherboard.
  • This can be a little bit tricky; hold the wire of the plug and gently pull it.

Unplug the battery connection from the motherboard.

This can be a little bit tricky; hold the wire of the plug and gently pull it.

Step 4

  • Remove the five screws from the battery using a Phillips #00 screwdriver.
  • Use your hands to remove the battery from the laptop.

Remove the five screws from the battery using a Phillips #00 screwdriver.

Use your hands to remove the battery from the laptop.

Step 5

  • Use a pair of tweezers to lift the clip securing the touchpad cable.
  • Disconnect the touchpad cable from the motherboard.

Use a pair of tweezers to lift the clip securing the touchpad cable.

Disconnect the touchpad cable from the motherboard.

Step 6

  • Remove the black tape hiding the screws on the trackpad.
  • Be careful when taking the tape off; try not to damage the other wires.
  • You will need the tape when reassembling the laptop.

Remove the black tape hiding the screws on the trackpad.

Be careful when taking the tape off; try not to damage the other wires.

You will need the tape when reassembling the laptop.

Step 7

  • Remove the three screws holding the trackpad in place using a Phillips #00 screwdriver.

Remove the three screws holding the trackpad in place using a Phillips #00 screwdriver.

Step 8

  • Lift the trackpad from the top side and remove it from the laptop.

Lift the trackpad from the top side and remove it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    MD Yeasin Rahman Khan

Member since: 01/12/2022

208 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       York University, Team S-13, Woodhouse Winter 2022                        

                                                  Member of York University, Team S-13, Woodhouse Winter 2022 



                    YORK-WOODHOUSE-W22SSG13                     


                                            1 Member                     


                                            1 Guide authored