Lenovo Ideapad 130 15Ast Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

DVD/CD Optical Drive
3 steps
Battery
6 steps

Flags

BackLenovo IdeaPad 130-15AST
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              DVD/CD Optical Drive

Verify that the DVD/CD Tray is free of DVD’s and CD’s.
Using a Phillips #00 screwdriver, remove one of the 6.0mm screws.

Verify that the DVD/CD Tray is free of DVD’s and CD’s.

Using a Phillips #00 screwdriver, remove one of the 6.0mm screws.

1024

Step 2

Using the Jimmy Tool, gently pry the DVD/CD Drive away from the case of the laptop.

Using the Jimmy Tool, gently pry the DVD/CD Drive away from the case of the laptop.

Step 3

Gently slide the DVD/CD Drive out of the laptop.

Gently slide the DVD/CD Drive out of the laptop.

Step 4

              Battery

Before proceeding, make sure the computer is turned off and it is not connected to any power source.
Using a Phillips #00 screwdriver, remove twelve of the 6.0mm screws.

Before proceeding, make sure the computer is turned off and it is not connected to any power source.

Using a Phillips #00 screwdriver, remove twelve of the 6.0mm screws.

Step 5

Do not try to completely remove this case without ensuring the entire case is free of connection points as this could crack or damage the case.
Use a thin, flat edge to gently break the seal of the case.

Do not try to completely remove this case without ensuring the entire case is free of connection points as this could crack or damage the case.

Use a thin, flat edge to gently break the seal of the case.

Step 6

Make sure that the back panel is completely free from the laptop.
Grab the sides of the back panel of the laptop with two hands. Then separate the panel from the laptop by lifting up.

Make sure that the back panel is completely free from the laptop.

Grab the sides of the back panel of the laptop with two hands. Then separate the panel from the laptop by lifting up.

Step 7

Using a Phillips #0 screwdriver, remove three 6.0mm screws.

Using a Phillips #0 screwdriver, remove three 6.0mm screws.

Step 8

Using a pair of tweezers, remove the black plug which includes 8 wires.

Using a pair of tweezers, remove the black plug which includes 8 wires.

Step 9

Grabbing the sides of the battery with one hand, remove the battery from the laptop.

Grabbing the sides of the battery with one hand, remove the battery from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors

                    Trever Resheske

Member since: 09/22/2019

694 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Embry-Riddle Aeronautical University, Team S12-G3, Lamothe Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S12-G3, Lamothe Fall 2019 



                    ERAU-LAMOTHE-F19S12G3                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team