Difficulty

Easy

Steps

4

Time Required

                          10 minutes            

Sections

2

  • Back Cover
  • 2 steps
  • USB Daughterboard
  • 2 steps

Flags

0

  • BackLenovo Ideapad 120s-14IAP

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover               
  • Be sure to power off and unplug your device before you begin your repair.
  • Orient the laptop so the top is laying flat on your work surface.
  • Remove ten 1.5mm Torx T5 screws from the back of the laptop.

Be sure to power off and unplug your device before you begin your repair.

Orient the laptop so the top is laying flat on your work surface.

Remove ten 1.5mm Torx T5 screws from the back of the laptop.

1024

Step 2

  • Insert the plastic opening tool or a Jimmy along the edge of the back cover and gently pry.
  • Run the tool all the way around the edge of the back cover and remove the back cover once it is no longer secure.
  • Remove the back cover.

Insert the plastic opening tool or a Jimmy along the edge of the back cover and gently pry.

Run the tool all the way around the edge of the back cover and remove the back cover once it is no longer secure.

Remove the back cover.

Step 3

              USB Daughterboard               
  • Use a spudger to lift the black fastener and disconnect the ribbon cable from the USB daughterboard.

Use a spudger to lift the black fastener and disconnect the ribbon cable from the USB daughterboard.

Step 4

  • Using tweezers, disconnect the speaker on the left from the USB daugterboard.
  • Remove two 2.5 mm Phillips #0 screws from the daughterboard.
  • Remove the daughterboard from the laptop.

Using tweezers, disconnect the speaker on the left from the USB daugterboard.

Remove two 2.5 mm Phillips #0 screws from the daughterboard.

Remove the daughterboard from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Robert Harper                     

Member since: 09/17/2019

153 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S22-G4, Branham Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S22-G4, Branham Fall 2019 



                    ERAU-BRANHAM-F19S22G4                     


                                            4 Members                     


                                            6 Guides authored