Lenovo Ideapad 110S 11Ibr Touchpad Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          15 - 45 minutes            

Sections

2

• Battery
• 5 steps
• Touchpad
• 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackLenovo Ideapad 110S-11IBR

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Ensure that your device is completely OFF before performing this procedure.
• Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

Ensure that your device is completely OFF before performing this procedure.

Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

1024

Step 2

• Separate the back lid from the laptop using a plastic opening tool.
• Lift the back lid off of the device.

Separate the back lid from the laptop using a plastic opening tool.

Lift the back lid off of the device.

Step 3

• Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.
• Do not pull on the socket itself or you risk damaging the motherboard.
• Remove the two pieces of tape that are holding the battery down.

Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

Do not pull on the socket itself or you risk damaging the motherboard.

Remove the two pieces of tape that are holding the battery down.

Step 4

• Remove the five 4 mm Phillips screws securing the battery.

Remove the five 4 mm Phillips screws securing the battery.

Step 5

• Lift the battery up and out of the device.

Lift the battery up and out of the device.

Step 6

              Touchpad               

• Use a Phillips #0 screwdriver to remove four 2.7 mm screws from the touch pad clicker assembly.

Use a Phillips #0 screwdriver to remove four 2.7 mm screws from the touch pad clicker assembly.

Step 7

• Remove the clicker assembly.

Remove the clicker assembly.

Step 8

• Use a plastic opening tool to remove the touch pad.
• Time must be taken to work the adhesive without causing damage to the touch pad.

Use a plastic opening tool to remove the touch pad.

Time must be taken to work the adhesive without causing damage to the touch pad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Samaa Aldar                     

Member since: 04/06/2019

181 Reputation

                                      2 Guides authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S11-G11, Wilson Spring 2019                        

                                                  Member of IUPUI, Team S11-G11, Wilson Spring 2019 



                    IUPUI-WILSON-S19S11G11                     


                                            2 Members                     


                                            6 Guides authored                     

daldal - Oct 28, 2022

Reply

i appreciate the tear down. I would like to see the screws that came out of the holes instead of empty screw holes though.