Lenovo Ideapad 110 Touch 15Acl Screen Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          45 minutes - 1 hour            

Sections

3

• Back Case
• 4 steps
• Battery Replacement
• 2 steps
• Screen Replacement
• 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackLenovo IdeaPad 110 Touch-15ACL

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Be sure to turn off your device and disconnect from the power adapter prior to beginning this repair.

What you need

Step 1

              Back Case               

• Remove the thirteen 6 mm Phillips #0 screws.

Remove the thirteen 6 mm Phillips #0 screws.

1024

Step 2

• Use an opening tool to gently disconnect most of the clips on the back panel.
• DO NOT force the panel out towards the optical disk drive.

Use an opening tool to gently disconnect most of the clips on the back panel.

DO NOT force the panel out towards the optical disk drive.

Step 3

• Pry the disk drive away from the center of the laptop.
• Don’t worry about any screws since we already removed the screws that are associated with the drive.
• Once the drive is removed, remove the one 2 mm Phillips #0 screw that is now exposed.

Pry the disk drive away from the center of the laptop.

Don’t worry about any screws since we already removed the screws that are associated with the drive.

Once the drive is removed, remove the one 2 mm Phillips #0 screw that is now exposed.

Step 4

• Unclip any of the remaining clips and remove the back panel.

Unclip any of the remaining clips and remove the back panel.

Step 5

              Battery Replacement               

• Remove the four 6 mm Phillips #0 mounting screws.

Remove the four 6 mm Phillips #0 mounting screws.

Step 6

• Detach the wire connected to the motherboard and remove the battery assembly.

Detach the wire connected to the motherboard and remove the battery assembly.

Step 7

              Screen Replacement               

• Open the laptop so the screen is facing you.
• Use a pick or spudger to detach the clips around the screen holding the bezel in place.
• Remove the bezel.

Open the laptop so the screen is facing you.

Use a pick or spudger to detach the clips around the screen holding the bezel in place.

Remove the bezel.

Step 8

• Remove the four 3 mm size Phillips #0 mounting screws.

Remove the four 3 mm size Phillips #0 mounting screws.

Step 9

• Carefully detach the display cable that attaches to the display.
• There may be a piece of tape covering the connection. Be sure to preserve this if possible—it ensures a proper connection to your display.

Carefully detach the display cable that attaches to the display.

There may be a piece of tape covering the connection. Be sure to preserve this if possible—it ensures a proper connection to your display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Clark Beuckman                     

Member since: 02/22/2022

529 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Clemson, Team 2-3, Hunter Spring 2022                        

                                                  Member of Clemson, Team 2-3, Hunter Spring 2022 



                    CLEM-HUNTER-S22S2G3                     


                                            5 Members                     


                                            6 Guides authored