Difficulty
Easy
Steps
4
Time Required
3 - 6 minutes
Sections
1
- Back Case
- 4 steps
Flags
0
BackLenovo IdeaPad 110 Touch-15ACL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Prior to starting this guide, you should turn off the device and unplug from the power adapter.
What you need
Step 1
Back Case
- Remove the thirteen 6 mm Phillips #0 screws.
Remove the thirteen 6 mm Phillips #0 screws.
1024
Step 2
- Use an opening tool to gently disconnect most of the clips on the back panel.
- DO NOT force the panel out towards the optical disk drive.
Use an opening tool to gently disconnect most of the clips on the back panel.
DO NOT force the panel out towards the optical disk drive.
Step 3
- Pry the disk drive away from the center of the laptop.
- Don’t worry about any screws since we already removed the screws that are associated with the drive.
- Once the drive is removed, remove the one 2 mm Phillips #0 screw that is now exposed.
Pry the disk drive away from the center of the laptop.
Don’t worry about any screws since we already removed the screws that are associated with the drive.
Once the drive is removed, remove the one 2 mm Phillips #0 screw that is now exposed.
Step 4
- Unclip any of the remaining clips and remove the back panel.
Unclip any of the remaining clips and remove the back panel.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Clark Beuckman
Member since: 02/22/2022
529 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
Clemson, Team 2-3, Hunter Spring 2022
Member of Clemson, Team 2-3, Hunter Spring 2022
CLEM-HUNTER-S22S2G3
5 Members
6 Guides authored