Difficulty

Moderate

Steps

9

Time Required

                          15 minutes

Sections

1

  • Hard Drive
  • 9 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLenovo IdeaPad 110-15ISK

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Keyboard Screws
  • Remove the two keyboard screws on the back of the device(the two on the same row)

Remove the two keyboard screws on the back of the device(the two on the same row)

1024

Step 2

              Remove the Keyboard
  • Insert a prying tool in the crack between the keyboard and frame. Start by the power button and go all the way round the keyboard.

Insert a prying tool in the crack between the keyboard and frame. Start by the power button and go all the way round the keyboard.

Step 3

              Keyboard Ribbon Cable
  • Remover the ribbon cable and remove the keyboard afterward.

Remover the ribbon cable and remove the keyboard afterward.

Step 4

              Under Keyboard
  • After the keyboard is removed, remove the screw and the battery connector.

After the keyboard is removed, remove the screw and the battery connector.

Step 5

              Disk Drive
  • Remove the screw that is under the two keyboard screws and pull the disk drive out.

Remove the screw that is under the two keyboard screws and pull the disk drive out.

Step 6

              Outer Screws
  • Remove all of the screws on the outside edge of the bottom.

Remove all of the screws on the outside edge of the bottom.

Step 7

              Separating the Case
  • Flip the laptop over and in the crack between the two case pieces slide a prying tool in between and follow the perimeter until the two pieces are separated.

Flip the laptop over and in the crack between the two case pieces slide a prying tool in between and follow the perimeter until the two pieces are separated.

Step 8

              Drive Bay
  • Remove the four screws securing the drive bay into the case.

Remove the four screws securing the drive bay into the case.

Step 9

              Removing the Drive
  • Remove the four screws the hold the metal cage onto the drive to separate them.

Remove the four screws the hold the metal cage onto the drive to separate them.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Stuart Luhigo

Member since: 11/20/2018

169 Reputation

                                      1 Guide authored                  



                       Badges:
                       2