Lenovo Ideapad 110 15Isk Cooling Fan Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes            

Sections

4

• Keyboard
• 3 steps
• Optical Drive
• 2 steps
• Upper Case
• 2 steps
• Cooling Fan
• 1 step

Flags

0

• BackLenovo IdeaPad 110-15ISK

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard               

• Flip the IdeaPad bottom side up.
• Using a Phillips #1 screwdriver, remove the two 6.0mm screws on the back panel, that hold the keyboard.
• Flip the computer back to top facing.

Flip the IdeaPad bottom side up.

Using a Phillips #1 screwdriver, remove the two 6.0mm screws on the back panel, that hold the keyboard.

Flip the computer back to top facing.

1024

Step 2

• Open the lid.
• Use the plastic opening tool to pry the keyboard up and away from the bottom assembly.

Open the lid.

Use the plastic opening tool to pry the keyboard up and away from the bottom assembly.

Step 3

• Next disconnect the keyboard cable by using the tip of the spudger or your finger to lightly push out the ribbon from the contact port.
• Completely remove the keyboard from the bottom assembly.

Next disconnect the keyboard cable by using the tip of the spudger or your finger to lightly push out the ribbon from the contact port.

Completely remove the keyboard from the bottom assembly.

Step 4

              Optical Drive               

• Using a Phillips #1 screwdriver, unscrew the one 5.0mm screw on the back panel.

Using a Phillips #1 screwdriver, unscrew the one 5.0mm screw on the back panel.

Step 5

• Flip the laptop to its back and the optical drive is located at the top left corner.
• Remove the optical CD DVD drive by lightly pulling it out of the assembly.

Flip the laptop to its back and the optical drive is located at the top left corner.

Remove the optical CD DVD drive by lightly pulling it out of the assembly.

Step 6

              Upper Case               

• Place the laptop bottom facing up.
• Using a Phillips #1 screwdriver, remove the remaining eight 6.0mm screws on the back panel.
• Flip the computer back to top facing.

Place the laptop bottom facing up.

Using a Phillips #1 screwdriver, remove the remaining eight 6.0mm screws on the back panel.

Step 7

• Separate the top case from the bottom using a plastic opening tool.
• Continue prying the top and bottom case from each other all around the perimeter of the laptop.

Separate the top case from the bottom using a plastic opening tool.

Continue prying the top and bottom case from each other all around the perimeter of the laptop.

Step 8

              Cooling Fan               

• On the back panel, the cooling fan is located at the top right.
• Unscrew the 6.0mm screw using the Phillips #1 screwdriver.
• Push the plastic piece towards the direction the wires are in with the tweezers to completely disconnect it from the back panel.

On the back panel, the cooling fan is located at the top right.

Unscrew the 6.0mm screw using the Phillips #1 screwdriver.

Push the plastic piece towards the direction the wires are in with the tweezers to completely disconnect it from the back panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Jakub Szark                     

Member since: 10/17/2018

513 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UW Tacoma, Team S1-G5, Rose Fall 2018                        

                                                  Member of UW Tacoma, Team S1-G5, Rose Fall 2018 



                    UWT-ROSE-F18S1G5                     


                                            4 Members                     


                                            35 Guides authored