Lenovo Ideapad 110 15Ibr Hard Drive Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

keyboard
5 steps

Flags

BackLenovo IdeaPad 110-15IBR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              keyboard

Before you proceed, make sure your computer is turned off and it’s not connected to any power source. Before removing the drive, make a backup copy of all the information on it if possible. Never remove the drive while the system is operating or in suspend mode.
Place laptop with the bottom facing up. Using a Philip #1 screwdriver unscrew all 13 screws. Gently pry the back out using a plastic opening tool, starting from one of the corners.

Before you proceed, make sure your computer is turned off and it’s not connected to any power source. Before removing the drive, make a backup copy of all the information on it if possible. Never remove the drive while the system is operating or in suspend mode.

Place laptop with the bottom facing up. Using a Philip #1 screwdriver unscrew all 13 screws. Gently pry the back out using a plastic opening tool, starting from one of the corners.

1024

Step 2

Using a Phillips #1 screwdriver, remove the four (5mm) screws holding the hard drive in place.

Using a Phillips #1 screwdriver, remove the four (5mm) screws holding the hard drive in place.

Step 3

Do not lift hard drive straight up otherwise you might risk breaking the connection port.
Gently slide the hard drive away and out out of the connection port.

Do not lift hard drive straight up otherwise you might risk breaking the connection port.

Gently slide the hard drive away and out out of the connection port.

Step 4

Using a Philip #1 screwdriver remove 2 screws from each side, (removing 4 screws in total) holding the hard drive into the housing.

Using a Philip #1 screwdriver remove 2 screws from each side, (removing 4 screws in total) holding the hard drive into the housing.

Step 5

Remove hard drive from housing.

Remove hard drive from housing.

To reassemble your device, follow these instructions in reverse order with your new replacement hard drive.

Cancel: I did not complete this guide.

                                                                                      14 other people completed this guide.

Author

                                      with 9 other contributors

                    Saddam  Alsinai

Member since: 10/18/2017

663 Reputation

                                      4 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       UW Tacoma, Team S3-G4, Liner Fall 2017                        

                                                  Member of UW Tacoma, Team S3-G4, Liner Fall 2017 



                    UWT-LINER-F17S3G4                     


                                            4 Members                     


                                            14 Guides authored

Chris Quirke - Jun 12, 2018

Unplug or remove battery first?

Mohamad Mustakim - Dec 24, 2018

Hard disk size?

Holden Phillips - Dec 28, 2018

you do not need to unplug or remove the battery

Introduction#

What you need#

Team#

Introduction

What you need

Team