Lenovo Ideapad 110 15Ibr Battery Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 minutes            

Sections

1

• Battery
• 4 steps

Flags

0

• BackLenovo IdeaPad 110-15IBR

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove screws               

• Before you proceed, make sure your computer is turned off and it’s not connected to any power source.
• Remove the thirteen 9 mm Phillips #1screws.
• Pull out the DVD drive and unscrew the final 3 wide-head screws holding the back in place.

Before you proceed, make sure your computer is turned off and it’s not connected to any power source.

Remove the thirteen 9 mm Phillips #1screws.

Pull out the DVD drive and unscrew the final 3 wide-head screws holding the back in place.

1024

Step 2

              Remove the back               

• Gently pry the back off using a plastic opening tool, starting from one of the corners.

Gently pry the back off using a plastic opening tool, starting from one of the corners.

Step 3

• Remove the two 9 mm Phillips #1 screws holding the battery.

Remove the two 9 mm Phillips #1 screws holding the battery.

Step 4

• Disconnect the battery cable connector from mother board.
• Remove battery from device.

Disconnect the battery cable connector from mother board.

Remove battery from device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      14 other people completed this guide.                                             

Author

                                      with 10 other contributors 

                    Saddam  Alsinai                     

Member since: 10/18/2017

663 Reputation

                                      4 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges                           

Team

                       UW Tacoma, Team S3-G4, Liner Fall 2017                        

                                                  Member of UW Tacoma, Team S3-G4, Liner Fall 2017 



                    UWT-LINER-F17S3G4                     


                                            4 Members                     


                                            14 Guides authored                     

Clarey Ryan - May 18, 2018

Reply

Informative except , you didn’t mention the three screws underneath the DVD drive. The DVD drive must be removed first before you can remove the 3 additional screws.

Daniel Jansen - Sep 7, 2018

Reply

I agree Clare! I didn’t see those either! Very frustrating at first! Thanks for the lead Clare!

charlie.bansj - Oct 1, 2018

Reply

Just cannot see where theres 13 screws got 11 cant see anything under or near the Drive clare.

Hugo Jhuboo - Dec 5, 2018

Reply

Easy to follow

djerro - Jul 29, 2019

Reply

I unscrew everything but to open it, it gets stuck in the middle….. i am afraid to pull hard…..